PP WOVEN SILT FENCE – EROSION CONTROL SILT BARRIER
A silt fence, also referred to as a filter fence, is a structure composed primarily of geotechnical fabric and that is used as a form of sediment control. These temporary barriers are relatively low in cost, especially when compared to the damages they can prevent. They keep loose soils from traveling into local bodies of water and they also minimize the impact that various forms of development can have on surrounding wildlife.
1)High tensile strength, falls and friction.
3)A good surface for print tasks.
4)UV-protection treatment if required.
5)Food contact compliance
|Product||PP Silt Fence|
|Width||70-520cm,available for wider fabric by heat sealing. Or as the clients’ requirement|
|Length||50M, 100M, 200M, as per request|
|Weight||70gsm ~150gsm, as per request|
|Mesh Size||7×7 8×8 9×9 10×10 11×11 12×12 14×14|
|Common Size||1 x10m, 1x 15m, 1x 50m;|
2 x10m, 2 x15m, 2x 50m;
1 x 100m, 1x 200m;
1.5 x 100m, 1.5 x 200m
|Color||Black, Green are common color, any other color is available|
|Packing||Pack in rolls with card tube in center and be wraped in PE or as customer need|
· Perimeter of construction sites
· Adjacent to streams, lakes and creeks
· Bottom of highly erodable slopes
· Around storm-water drainage ditches and culverts
Silt Fence Installation
Install a more secure silt fence faster and easier with the silt fence installer attachment. Meet erosion control regulations and avoid costly fines. The silt fence installer is the fastest, easiest, and most economical way to install silt fence. Simply load the fabric into the quick-threading installer, roll into the ground and drive – the silt fence unrolls itself. A quick change cap – mounted on the end of the silt fence installer – includes a spring-loaded plate which ensures proper tension on the fence roll, keeping the roll from accidentally unwinding while on the job. And the coulter wheel slices through the turf and roots of the working environment.